ActSafe PME Manual de usuario descargar pdf (Pagina 20)

USAGE

Emergency descent

Stay connected to your backup rope sys-

tem during all these steps. In the pictures

the backup system is excluded for clarity.

Use the equipment in the rescue kit.

1. Attach the Descender to the rope under

the ascender and connect it to the

harness with the attached red karabiner.

Ensure that the Descender have been

threaded correctly.

2-4

2. Attach the rope clamp (blue karabiner)

to the live rope above the ascender

(approx. 10 cm).

3. Connect the rope clamp to the harness

with the red karabiner on the shorter

sling.

4. Tighten the short sling by pushing

the rope clamp up.

The connection to the live rope is now formed

by the rope clamp that is attached to the

harness by the short sling.

5. Release the rope from the rope grab.

The Ascender is now loose and you are

connected to the rope clamp, the Descender

and your backup system.

Have sucient rope slack (approx 0.5 m)

between the Ascender and the Descender

so you can work easily.

RECOMMENDATION

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

ActSafe PME Manual de usuario Pagina 20