ActSafe PME Guía de usuario descargar pdf (Pagina 20)

RESCUE OF COLLEAGUES FROM

FRAMEWORK STRUCTURES

Where ActSafe PME is used in working situations on framework

structures, a method has been developed where the work rope,

which is used to ascend and descend to the place of work, is

anchored at ground level. The work rope is anchored on the ground

using a sling, a karabiner and a descending device.

Should an incident occur, the person on ground level should be able

to perform the rescue operation by lowering the worker, on

condition that the injured person is not connected to a

lanyard and is not unconscious. (In some work situations, the

use of a lanyard can simplify “work positioning”, and during the

course the participants will learn a method that will apply in these

situations).

The procedure below can be used in most cases, i.e. if the person in

distress is only connected to the work rope, or is still contactable

after an injury and can disengage his lanyard,

- Lower the injured person by using the I’D (the rope length shall be

at least twice the height of the rescue).

- By using this rigging-method the rescue system is built into the

work rope system.

300 k

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

ActSafe PME Guía de usuario Pagina 20